View NUP8011MUTAG_4127538.PDF datasheet online --- IC-ON-LINE

Datasheet File OCR Text:

NUP8011MU Low Capacitance Transient Voltage Suppressor Array
This integrated transient voltage suppressor device (TVS) is designed for applications requiring transient overvoltage protection. It is intended for use in sensitive equipment such as computers, printers, business machines, communication systems, and other applications. Its integrated design provides very effective and reliable protection for eight separate lines using only one package. These devices are ideal for situations where board space is at a premium.
Features http://onsemi.com
1 8
* Low Capacitance * Low Leakage Current < 1 mA @ 4.3 V * ESD Ratings:
IEC61000-4-2, 8 kV (Contact) Machine Model = Class C, 400 V Human Body Model = Class 3B, 8 kV UDFN Package, 1.2 x 1.8 mm Moisture Sensitivity Level 1 This is a Pb-Free Device Provides Protection for ESD Industry Standards: IEC 61000, HBM Protects the Line Against Transient Voltage Conditions Minimize Power Consumption of the System Minimize PCB Board Space
2
7
3
6
* * * * * * * * * * * *
4
5
(Top View) 8 1 UDFN8 CASE 517AD P3M G 1
Benefits MARKING DIAGRAM
Applications
ESD Protection for Data Lines Wireless Phones Handheld Products Notebook Computers LCD Displays
P3 = Specific Device Code M = Month Code G = Pb-Free Package (Note: Microdot may be in either location)
PIN CONNECTIONS
1 4
8
5
ORDERING INFORMATION
Device NUP8011MUTAG Package UDFN8 (Pb-Free) Shipping 3000 / Tape & Reel
For information on tape and reel specifications, including part orientation and tape sizes, please refer to our Tape and Reel Packaging Specifications Brochure, BRD8011/D.
(c) Semiconductor Components Industries, LLC, 2007
1
September, 2007 - Rev. 0
Publication Order Number: NUP8011MU/D
NUP8011MU
ELECTRICAL CHARACTERISTICS
(TA = 25C unless otherwise noted) Symbol VRWM IR VBR IT IF VF Parameter Working Peak Reverse Voltage Maximum Reverse Leakage Current @ VRWM Breakdown Voltage @ IT Test Current Forward Current Forward Voltage @ IF VC VBR VRWM IF
I
IR VF IT
V
IPP
Uni-Directional
MAXIMUM RATINGS (TA = 25C unless otherwise noted)
Characteristic Steady State Power - 1 Diode (Note 1) Thermal Resistance, Junction-to-Ambient Above 25C, Derate Maximum Junction Temperature Operating Temperature Range Storage Temperature Range Lead Solder Temperature (10 seconds duration) Symbol PD RqJA TJmax TOP Tstg TL Value 380 327 3.05 150 -40 to +85 -55 to +150 260 Unit mW C/W mW/C C C C C
Stresses exceeding Maximum Ratings may damage the device. Maximum Ratings are stress ratings only. Functional operation above the Recommended Operating Conditions is not implied. Extended exposure to stresses above the Recommended Operating Conditions may affect device reliability.
ELECTRICAL CHARACTERISTICS (TA = 25C)
Breakdown Voltage VBR @ 1 mA (Volts) Min 6.47 Nom 6.8 Max 7.14 Leakage Current IRM @ VRM VRWM 4.3 IRWM (mA) 1.0 Typ Capacitance @ 0 V Bias (pF) (Note 2) Typ 12 Max 14 Typ Capacitance @ 3 V Bias (pF) (Note 2) Typ 6.7 Max 9.5
Device NUP8011MUTAG
Device Marking P3
1. Only 1 diode under power. For all 4 diodes under power, PD will be 25%. Mounted on FR-4 board with min pad. 2. Capacitance of one diode at f = 1 MHz, VR = 0 V, TA = 25C
http://onsemi.com
2
NUP8011MU
TYPICAL ELECTRICAL CHARACTERISTICS
5.0 TYPICAL CAPACITANCE (pF) 1 MHz FREQUENCY IR, REVERSE LEAKAGE (nA) 14 12 10 8 6 4 2 0 -50 0 50 100 150 0 1 2 3 4 5 6 T, TEMPERATURE (C) BIAS VOLTAGE (V) TA = 25C
4.0
3.0
2.0
1.0 0 -100
Figure 1. Reverse Leakage versus Temperature
Figure 2. Capacitance
1 IF, FORWARD CURRENT (A)
0.1
0.01
TA = 25C 0.001 0.6 0.8 1.0 1.2 1.4 1.6 1.8 VF, FORWARD VOLTAGE (V)
Figure 3. Forward Voltage
http://onsemi.com
3
NUP8011MU
PACKAGE DIMENSIONS
UDFN8, 1.8x1.2, 0.4P CASE 517AD-01 ISSUE O
D
2X
A B
A3
2X
0.15 C
0.10 C
8X
0.08 C
8X
L
8X
K
ON Semiconductor and are registered trademarks of Semiconductor Components Industries, LLC (SCILLC). SCILLC reserves the right to make changes without further notice to any products herein. SCILLC makes no warranty, representation or guarantee regarding the suitability of its products for any particular purpose, nor does SCILLC assume any liability arising out of the application or use of any product or circuit, and specifically disclaims any and all liability, including without limitation special, consequential or incidental damages. "Typical" parameters which may be provided in SCILLC data sheets and/or specifications can and do vary in different applications and actual performance may vary over time. All operating parameters, including "Typicals" must be validated for each customer application by customer's technical experts. SCILLC does not convey any license under its patent rights nor the rights of others. SCILLC products are not designed, intended, or authorized for use as components in systems intended for surgical implant into the body, or other applications intended to support or sustain life, or for any other application in which the failure of the SCILLC product could create a situation where personal injury or death may occur. Should Buyer purchase or use SCILLC products for any such unintended or unauthorized application, Buyer shall indemnify and hold SCILLC and its officers, employees, subsidiaries, affiliates, and distributors harmless against all claims, costs, damages, and expenses, and reasonable attorney fees arising out of, directly or indirectly, any claim of personal injury or death associated with such unintended or unauthorized use, even if such claim alleges that SCILLC was negligent regarding the design or manufacture of the part. SCILLC is an Equal Opportunity/Affirmative Action Employer. This literature is subject to all applicable copyright laws and is not for resale in any manner.
PUBLICATION ORDERING INFORMATION
LITERATURE FULFILLMENT: Literature Distribution Center for ON Semiconductor P.O. Box 5163, Denver, Colorado 80217 USA Phone: 303-675-2175 or 800-344-3860 Toll Free USA/Canada Fax: 303-675-2176 or 800-344-3867 Toll Free USA/Canada Email: orderlit@onsemi.com N. American Technical Support: 800-282-9855 Toll Free USA/Canada Europe, Middle East and Africa Technical Support: Phone: 421 33 790 2910 Japan Customer Focus Center Phone: 81-3-5773-3850 ON Semiconductor Website: www.onsemi.com Order Literature: http://www.onsemi.com/orderlit For additional information, please contact your local Sales Representative
EEE EEE
D2
1 8
PIN ONE REFERENCE
E A1
TOP VIEW (A3) A
DETAIL A
SIDE VIEW A1 C
SEATING PLANE
6X
e
4
E2
5
8X b
BOTTOM VIEW
0.10 C A B 0.05 C
NOTE 3
http://onsemi.com
4
CC CC EE
DETAIL A
0.15 C
NOTES: 1. DIMENSIONING AND TOLERANCING PER ASME Y14.5M, 1994. 2. CONTROLLING DIMENSION: MILLIMETERS. 3. DIMENSION b APPLIES TO PLATED TERMINAL AND IS MEASURED BETWEEN 0.15 AND 0.20 mm FROM TERMINAL. 4. COPLANARITY APPLIES TO THE EXPOSED PAD AS WELL AS THE TERMINALS. DIM A A1 A3 b D D2 E E2 e K L MILLIMETERS MIN NOM MAX 0.45 0.50 0.55 0.00 0.03 0.05 0.127 REF 0.15 0.20 0.25 1.80 BSC 0.90 1.00 1.10 1.20 BSC 0.20 0.30 0.40 0.40 BSC 0.20 ----0.20 0.25 0.30
NUP8011MU/D

▲Up To Search▲

Price & Availability of NUP8011MUTAG

	To Download NUP8011MUTAG Datasheet File
If you can't view the Datasheet, Please click here to try to view without PDF Reader .